How to Reset Printer Canon to Eliminate Error Codes

Canon printers require a reset in a few times it is used. Especially if the printer ink is often leaky, then the time will reset faster. It was marked by the emergence of error code E27 and E28 on the printer indicator, this was because Waste ink absorber full or platen waste ink absorber full. The printer can not be used before we do the reset. To perform the reset is encouraged to contact the Canon service center, but to save costs we can do it yourself at home.

Here's an example of how to reset the printer Canon MP 160 or MP 180:

Please download the free Canon software reset at address: http://www.box.net/shared/4yblbn34kg
copy and open the software on the computer, so the software can be detected earlier (MP Tool knobs on) do the following:

1. Unplug Power

2. Press and hold the button "Power" (On / Off)

3. Reinsert the power cable

4. Press the "Reset" and release

5. Release the "Power" button

6. If successful alarm light will turn on (if not repeat again).

7. After that MP Tool software is detected, now run the software.

How the above is not fully effective, if you want to be great dismantle your printer and do the cleaning on Waste ink absorber full or platen waste ink absorber is full of foam that holds the ink in the printer (see the manual for its location on the printer). If this is not done then the long run will be more full of ink, printer damage could not be avoided.